How to straighten a bent mast - Superspars advise

Bent masts may be straightened providing the bend is gentle and there are no distinct signs of other damage. If there are signs of the spar extrusion having collapsed or large dents in the area of the bend or local damage adjacent to the spreader bracket, straightening may not be successful.

DO NOT lever the mast between two posts and attempt to straighten from one end as this will almost certainly result in an unreparable kink at one of the supports.

The mast may be straightened by supporting it on trestles, tyres or sandbags or something equally soft about 3m apart equally spaced either side of the point of maximum bend. Then with the help of a colleague or two, ease the mast down in the opposite direction of the bend - the mast will be "springy" and it takes a bit of effort to push the bend out.

If in doubt contact a Superspars reseller for advice.

Latest forum posts

    • mast floats
    • Thanks - that is really helpful - all I want is a slowing down if it's a...

More Topics »

Forthcoming Events

16 Aug 2019
Clontarf, Dublin
Irish National Championships
07 Sep 2019
Yeadon Sailing Club
Mirror Open
05 Oct 2019
Ripon Sailing Club
Open & Northern Travellers